LML-S

• Sensor for limit value detection in liquids
• Media contacting parts of stainless steel
• Mounting without removing the float (G5 and G6)

Function

• The device is a sensor for limit value detection in liquids.
• A ring magnet integrated in the float activates the contacts inside the probe tube via its magnetic field. If the probe strays outside the range of the mechanical contact, it reverts to the output status.
• The skipping of switching points caused by abrupt level changes can be avoided using snap-on set collars on the probe tube. The same set collars are also used for latching contact operation.

Pepperl+ Fuchs Magnetic Immersion Probe for Limit Value Detection

Connection

Change-over contact

Dimensions

Technical Data

General specifications
Function principle		ring magnet as switching element in the float, reed contact, change-over contact number of contacts: – version LML1: 1 contact – version LML2: 2 contacts – version LML3: 3 contacts
Series		LML-S
Supply
Rated voltage	Ur	250 V AC/DC
Current consumption		1 A
Power consumption		40 VA
Output
Connection		This device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements.
Directive conformity
Low voltage
Directive 2014/35/EU		EN 61010-1:2010
Conformity
Degree of protection		IEC 60529:2000
Operating conditions
Installation conditions
Switching point		position according to specification
Process conditions
Process temperature		version LML: -30 … 150 °C (-22 … 302 °F) version LML-PVC1: -10 … 80 °C (14 … 176 °F)
Process pressure (static pressure)		≤ 25 bar (362.6 psi)
Density		version S2: ≥ 0.8 g/cm3 version S3: ≥ 0.7 g/cm3
Ambient conditions
Ambient temperature		-20 … 70 °C (-4 … 158 °F)
Mechanical specifications
Degree of protection		IP66 / IP68
Connection		version LML: terminal box, max. 9 terminals version LML-PVC1: connection cable 1 m (3.3 ft), 0.75 mm2
Material		float, guide tube, process connection: stainless steel 1.4571/316Ti connection cable: PVC terminal box: aluminum die-casting
Dimensions		float: – version S2: cylinder ∅44 mm x 52 mm – version S3: ball ∅52 mm guide tube: ∅12 mm, max. length 3000 mm terminal box: 80 x 75 x 55 mm
Process connection		thread G3/8A, G1-1/2A, G2A to DIN/ISO 228/1
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accessories
Designation		– LML-Z11 set collar, 1.4571/316Ti – LML-FS2 float, cylinder, Ø44 mm x 52 mm, 1.4571/316Ti – LML-FS3 float, ball, Ø52 mm, 1.4571/316Ti

Type Code

The post Pepperl+ Fuchs Magnetic Immersion Probe for Limit Value Detection appeared first on Politek Vietnam Import Export Services Trading Company Limited.

The post Bucher Hydraulics External Gear Pumps, Series AP appeared first on Politek Vietnam Import Export Services Trading Company Limited.

The post Bucher Hydraulics Axial Piston Pumps AX appeared first on Politek Vietnam Import Export Services Trading Company Limited.

The post Blacoh SPILLSTOP, POLY/NORYL/POLY/NORYL appeared first on Politek Vietnam Import Export Services Trading Company Limited.

The post Blacoh 370 CU IN INLET STABILIZER, POLY/AFLAS appeared first on Politek Vietnam Import Export Services Trading Company Limited.

The post Blacoh AUTOMATIC INLET STABILIZER, 2.0″ NPT appeared first on Politek Vietnam Import Export Services Trading Company Limited.

The post Blacoh AODDAMPENER, 1″ NPT (AOD-10-NPT) appeared first on Politek Vietnam Import Export Services Trading Company Limited.

The post Blacoh AODDAMPENER, 1″ (AOD-10-BSP) appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Walchem EHE Series Metering Pump, solenoid pump, microprocessor control w/external pulse & MAAV, 12GPH @ 60psig max, PVC head/fittings, PTFE/EPDM diaphragm, CE/HC balls, PCTFE seat, FKM seals, PTFE gasket, 1/2 OD, 115AC 1.8A 48W. Use E46VE-PK parts kit.

• Manufacturer: Walchem
• Connection Size: 1/2 in. O.D.
• Gasket: PTFE
• Max. Pressure: 60 psig
• Product Type: Electronic Metering Pumps
• Pump Head: PVC
• Valve Seat: PCTFE
• Diaphragm Material: PTFE/EPDM
• Max. Capacity: 12.0 GPH
• Product Category: Metering Pumps

Dimension Drawing

The post EHE46E1-VE Walchem EHE Series Metering Pump 12GPH 60psig PVC appeared first on Politek Vietnam Import Export Services Trading Company Limited.

• Capacity:  Up to 50 mc/h
• Delivery Head:  Up to 30 bar
• Speed:  250 / 1450 rpm
• Press. Syst:  725 psi [50 bar] (standard) 2175 psi [150 bar] (HP Version)
• Temperature:  Up to +392 °F (+ 200°C )

The post M Pump process Magnetic Drive Pumps (GS MAG-M) appeared first on Politek Vietnam Import Export Services Trading Company Limited.