Vogel pump Spandau Pumpen - Politek Vietnam Import Export Services Trading Company Limited

Vogel pump Spandau Pumpen Vane pump FLMF (FLMF12-2000+100)

quantri — Mon, 07 Apr 2025 09:17:21 +0000

Technical data

Vane pump FLMF

SKF vane pump units FLMF12 and FLMF24
For flanging to an oil tank
Single-circuit flange units with cast-in valve chambers
Electrically powered
Suitable for:
SKF MonoFlex single-line centralized lubrication systems and
SKF CircOil oil circulating lubrication systems
Lubricant: Oil
Permissible operating viscosity: 20 to 850 mm²/s
Number of outlets: 1
Flow rate: 1.2 (FLM12) or 2.4 (FLM24) l/min
Back pressure: 3 (FLM24) or 6 (FLM12) bar
CE conformity mark

Order number	FLMF12-2000	FLMF24-2000
Flow rate¹)	1.2 l/mm	2.4 l/mm
Back pressure	max. 6 bar	max. 3 bar
Permissible operating viscosity	20 – 850 mm²/s	20 – 500 mm²/s
Suction height²)	3000 mm	1000 mm
three-phase motor Rated power Rated speed Rated current³)	0.075 kW 2700 rpm 0.5/0.29 A	0.075 kW 2700 rpm 0.5/0.29 A
Suction connection S thread d1	M16×1.5	M16×1.5

based on an operating viscosity of 140 mm²/s, at a back pressure p=5 bar
with open pressure line
at 50 Hz, 230/400 V

The post Vogel pump Spandau Pumpen Vane pump FLMF (FLMF12-2000+100) appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Vogel pump Spandau Pumpen Drum pump MPB, pneumatic SKF-MPB-Pump-1/1

quantri — Mon, 07 Apr 2025 09:12:38 +0000

Solenoid valve-operated pneumatic drum pump MPB for single-line, dual-line and progressive lubrication systems

Designed to pump lubricant into a centralized lubrication system, the SKF MPB pump unit is a pneumatic drum pump in which the conventional mechanical air motor valve has been replaced by a solenoid valve. With the right equipment, the MPB pump can be used with flexible plastic lubricant containers. The pump is suitable for lubricant drums weighing 18, 50, or 180 kg.

The advantages of a magnetically controlled air motor include:

Internal piston reversing; no external signal required
Lubrication-free air motor
Fewer mechanical components extend the service life of the air motor

The cover sets for the pump are available in two versions:

ECO – for use with NLGI class 2 greases
STA – for use with NLGI class 1 and 2 greases

Technical data

Drum pump MPB, pneumatic

Operating temperature: -10 to +55 °C
Lubricant pressure: max. 300 bar
Operating air pressure: 2 – 4.5 bar
Pressure ratio: 65:1
Delivery capacity: 850 g/min
Stroke capacity: 5.5 g/stroke
Drum sizes: 18, 50, 180 kg
Material: aluminum, plastic, steel
Protection class: IP 65
Pump line diameter: 50 mm
Air inlet connection: 8mm, G 1/4
Lubricant outlet connection: 12 mm, G 1/4
Connection lubricant return to tank: 12 mm, G 1/4
Noise level, peak: < 80 dB
Weight
1/8 pump: 6.3 kg
1/4 pump: 7.6 kg
1/1 pump: 8.8 kg
Dimensions
1/8 pump: 650 x 130 x 130 mm
1/4 pump: 920 x 130 x 130 mm
1/1 pump: 1020 x 130 x 130 mm

The post Vogel pump Spandau Pumpen Drum pump MPB, pneumatic SKF-MPB-Pump-1/1 appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Vogel pump Spandau Pumpen Single-stroke piston pump for oil 082885

quantri — Mon, 07 Apr 2025 09:07:59 +0000

Pneumatically driven piston pumps 82885 and 83667 for single-line systems

Model 82885 is an air-operated single-stroke oil pump. The pump’s piston is pressurized with compressed air and moved forward, discharging the lubricant in front of it. A spring then returns the piston, and the pressure is released via an integrated (three-way) check/vent valve on the lubricant line. The transparent reservoir is filled via a filler neck with a strainer. The pump unit is suitable for systems with a large number of lubrication points and timed lubrication strokes.

Model 83667 has the same functionality but is equipped with a larger container.

Features and Benefits

Reliable operation
Container with filling spout and integrated sieve
Suitable for lubricant distributors of categories 2, 3 and 4

Applications

textile machinery
steelworks
Packaging systems
Plastics processing
Material transport
Food and beverage industry

Technical data

Single-stroke piston pump for oil

Function: pneumatically driven piston pump
Outlets: 1
Displacement: 7.4 cm³/stroke
Lubricant: Oil, synthetic oils on request
Operating temperature: -23 to +65 °C
Operating pressure: max. 70 bar
Containers: 0.6 and 2.0 l
Material (container): acrylic
Connection: 1/4 NPTF(F)
Air inlet connection: 1/4 NPTF(F)
Gear ratio: 20:1
Compressed air valve: required, 3-way
Dimensions: min. 263 x 133 x 152 mm; max. 470 x 140 x 152 mm
Installation position: vertical

The post Vogel pump Spandau Pumpen Single-stroke piston pump for oil 082885 appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Vogel pump Spandau Pumpen Hydraulic Pump HTL 201 EEX HTL201EEX

quantri — Mon, 07 Apr 2025 09:03:02 +0000

Hydraulic pump HTL 201 EEX for underground mining

The Lincoln HTL 201 EEX is the first hydraulic pump designed for use in applications involving volatile substances, such as underground mining. Its steel pump body and lubricant reservoir make it a cost-effective alternative to expensive electric pumps, which also require a protective enclosure. Designed to minimize friction and wear, the HTL 201 EEX is powered by the hydraulic system of a master machine or carrier system and supplies lubricant as long as the machine or carrier is in operation. Based on the proven Lincoln HTL 201 hydraulic tool lubricator concept, the HTL 201 EEX incorporates a grounding point for electrical discharge when needed.

Features and Benefits

Robust construction
Easy installation and maintenance
Refill container
Suitable for lubricants up to NLGI class 2
Integrated throttle for changing the lubricant quantity
For progressive lubricant distributors
ATEX I M2 c (mining)
ATEX II 2G c IIC TX (Gas)
ATEX II 2D c TX (dust)

Technical data

Hydraulic pump HTL 201 EEX

Function: hydraulically driven pump
Operating temperature: -25 to +65 °C
Hydraulic pressure carrier system: 80 – 210 bar
Starting pressure of the pump HTL201*: ≥ 30 bar
Lubricants: Greases up to NLGI class 2
Capacity of the lubricant container: 1.5 kg
Weight (empty pump): 15 kg
Installation position: any

Connections/Outlets

Pressure connection P: G 1/4”
Return line connection T: G 1/4”
Lubricant supply line: G 1/4”
Lubrication fitting: G 1/8”

EEX classifications

ATEX I M2 c (mining)
ATEX II 2G c IIC TX (Gas)
ATEX II 2D c TX (dust)

* The pressure relief valve of the HTL 201 pump is set to 270 bar. All system components must be designed for the maximum hydraulic pressure of the carrier system.

The post Vogel pump Spandau Pumpen Hydraulic Pump HTL 201 EEX HTL201EEX appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Vogel pump Spandau Pumpen Single Circuit Gear Pump Unit ME5-2000+299

quantri — Mon, 07 Apr 2025 08:05:46 +0000

The MFE5-2000+299 gerotor pump is used in the so-called MFE5 units and is therefore ideal for supplying lubricant in single-line systems. With a flow rate of 0.5 liters of lubricant per minute at a back pressure of up to 28 bar, the model is suitable for numerous applications in mechanical engineering. Gear pumps can be used in everything from machine tools to compressors to wind turbines.

Technical data

Single-circuit gear pump unit ME5-2000+299

Motor DM7: 207-254 V / 360-440 V, 50 Hz, 249-305 V / 432-528 V, 60 Hz
Flow rate: 0.5 l/min
Viscosity: 20 – 1000 mm²/s
Pumped media: mineral oil or synthetic oil
Operating temperature: +10 to +40 °C
Operating pressure: max. 30 bar
Rated speed: .2700 rpm
Suction head: 500 mm
Suction connection: M14x.15 i
Pressure connection: M14x1.5 i
Design: without flange, with relief valve

Gear pump unit without reservoir, product series Mxx for oil circulation lubrication
For further versions, please contact us at any time! Contact Us

The post Vogel pump Spandau Pumpen Single Circuit Gear Pump Unit ME5-2000+299 appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Vogel pump Spandau Pumpen MKF1-11AC00000+924 Flow Grease In-Line Pump

quantri — Mon, 07 Apr 2025 07:59:35 +0000

MKF1-11AC00000+924 Single-line pump for fluid grease

Motor: 24 V, DC
Flow rate: 0.1 l/min
Container: 2 L plastic
NLGI grade: 000 / 00
Pumped media: fluid grease
Operating temperature: +10 to +40 °C
Operating pressure: max. 30 bar
Control unit: without, with terminal block
Level switch, break contact (wire break detection function)
Pressure switch, 20 bar, make contact
Electrical connection: 2 cable glands
Protection class according to DIN EN 60529 (VDE 0470-1) IP 54

Gear pump unit, MKF product series for fluid grease.
For further versions, please contact us at any time! Contact Us

The post Vogel pump Spandau Pumpen MKF1-11AC00000+924 Flow Grease In-Line Pump appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Vogel pump Spandau Pumpen MFE5-KW3-2+140 Single Line Pump for Oil

quantri — Mon, 07 Apr 2025 04:52:02 +0000

MFE5-KW3-2+140 single-line pump for oil

Motor: 230/400 V, 50 Hz
Flow rate: 0.5 l/min
Reservoir: 3 L plastic
Viscosity: 20-1000 mm²/s
Pumped media: Mineral oil or synthetic oil
Operating temperature: +10 to +40 °C
Operating pressure: max. 28 bar
Control unit: without, with terminal block

*
207-254V / 360-440V, 50HZ
249-305V / 432-528V, 60HZ

For further details please feel free to contact us at any time! Contact Us

The post Vogel pump Spandau Pumpen MFE5-KW3-2+140 Single Line Pump for Oil appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Vogel pump Spandau Pumpen Submersible pump PRA 22K-200

quantri — Sun, 06 Apr 2025 18:11:09 +0000

Submersible pump PRA 22K

Features:

Single- to multi-stage centrifugal pump
Suitable for pumping slightly contaminated media
Suitable for vertical installation in the container
Pressure connection above the cover plate of the container
Pressure connection is designed with internal thread G¾, dimensions according to DIN12157

Mechanical design

Pump nozzle: PPU
Pump shaft: 1.4122
Impeller: PPU
Intermediate chamber: PPU (PRA 22, 27: LCP)
Pump base: PPU (PRA 22, 27: LCP)

Variants

Sieve filter: stainless steel 1.4301
Extension tube: PP
Stirring paddle: plastic

The Spandau pumps of the PRA 22K series are suitable for operation at 50 and 60 Hz.

Technical data at 50 Hz

Flow rate: 90 l/min
Delivery head: max. 23 m
Diving depth: max. 320 mm
Kinematic viscosity: max. 20 mm²/s
Temperature range: 5°C to 60°C
Grain size: max. Ø 0.3 mm
Dirt content: max. 50 g/m³
Direction of rotation (view of the motor fan): counterclockwise
Media: Emulsions, cooling and cutting oils, cleaning fluids, water and mild acids

Technical data at 60 Hz

Flow rate: 90 l/min
Delivery head: max. 30 m
Diving depth: max. 320 mm
Kinematic viscosity: max. 20 mm²/s
Temperature range: 5°C to 60°C
Grain size: max. Ø 3 mm
Dirt content: max. 50 g/m³
Direction of rotation (view of the motor fan): counterclockwise
Media: Emulsions, cooling and cutting oils, cleaning fluids, water and mild acids

The post Vogel pump Spandau Pumpen Submersible pump PRA 22K-200 appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Vogel pump Spandau Pumpen Immersion Pump PR4

quantri — Sun, 06 Apr 2025 17:57:03 +0000

Sealless immersion pumps PR4

Compact, lightweight centrifugal pump auf plastic for clean, turbid or dirty fluids.

Machine tools equipped with PR pumps

Press Brakes (free embossing / embossing)
Drilling machines
Boring plants
Lathes (old lathe)
Manufacturing centers
Milling machines
Long-haul machines (Long-haul machine)
Guide and drawbar turning machines
Hole machines
Punching machines
Sawing machines

Further applications

Optical machines

Spandau Pumpen offers an outstanding solution to the pumping tasks faced in optical machines, such as those used in the manufacture of corrective lenses; special lenses for night vision equipment or binoculars; telescopes; photographic equipment and precision lenses.

Spandau centrifugal pumps are used in the processing of glass and plastics. Their high reliability when pumping emulsions and oils for sawing, polishing and grinding make them a strong component in any optical machine.

Polishing and grinding emulsions are used in machines for grinding and polishing. The particles are very fine but highly abrasive. In other words, all parts of the pump need to be made of resistant materials such as plastic or stainless steel.

Temperature control and cooling units

Temperature control means bringing a medium to a certain temperature and keeping it there. The process goes in both directions, cooling and heating. Some manufacturers have specialized in cooling, some in heating. However, the trend today is towards building combination units that can be used for both cooling and heating. For example, in the case of temperature control of injection molding tools, the mold is first heated; the plastic is introduced into the mold, and then the process is put in reverse. In other words, the mold is cooled down.

The number of manufacturers offering these kinds of devices has been growing strongly for several years with many new small- to medium-sized companies coming into being. This is because the technical processes in many industries are changing so that an additional cooling step is necessary.

The cooling capacity of the units ranges from a few kW up to several hundred kW. That explains why so many different pump models (in terms of rated power) are required.

Technical Specifications

Immersion Pump PR4

Fluids delivered: Emulsions, also with chemical additives, low-viscosity oils, various qualities of water
Delivery rate: 30 L/min
Delivery head: max. 4 m
Motor: 230 / 400 V, 50 Hz, 0,33 / 0,19 A, 0,05 kW, 2730 rpm
Temperature range: 0°C to + 60°C
Installation: vertical
Connection: G 1/2 male thread
Direction of rotation (as viewed from above looking down on ventilation side of the motor): counterclockwise

Motor housing: Aluminium
Pump support: PPN
Pump bottom: PPN
Impeller: POM / GF
Shaft: ETG or stainless steel 1.4122
Antifriction bearings: Radial deep-groove ball bearing with two side plates (2 Z); with permanent lubrication
Splash guard: Splash ring above pump chamber
(Plus: splash ring underneath flange, V-ring underneath lower ball bearing)

Single-phase motor and 60 Hz versions are available – please contact us for other versions.

Main applications

Humidifiers, air conditioning
Sawing machines
Stone saws
Grinding machines
Cooling systems
Machine tools

Product Features

Centrifugal pump, 1-stage mode
Open impeller
Port dimensions to DIN EN 12157
Immersion depths 90 mm, 120 mm
Weight: 2.5 kg
Three-phase or single-phase motor

Options (on request)

Extension tube (50 mm)
Thermal circuit breaker in the winding or thermistor
Equipped with capacitor and mains plug, completely prepared for single-phase AC

Technical Drawings

The post Vogel pump Spandau Pumpen Immersion Pump PR4 appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Vogel pump Spandau Pumpen 3Mot.DB63.2370+140

quantri — Sun, 06 Apr 2025 17:29:49 +0000

Manufacturer: VOGEL Spandau Pumpen
Model: 3~Mot.DB63.2370+140
Product No. (Nr.): 0000742338
Standard: EN60034
Protection Class: IP54 (Protected against dust ingress and against water spray from all directions)
Insulation Class: I.Cl.B
Frequency: 50 Hz
Electrical Connection Type: Δ/Y (Delta/Star)
Voltage: 230/400 V
Current: 1.73 / 1.00 A
Speed: 2667 min⁻¹ (revolutions per minute)
Power: 0.37 kW

For further details please feel free to contact us at any time! Contact Us

The post Vogel pump Spandau Pumpen 3Mot.DB63.2370+140 appeared first on Politek Vietnam Import Export Services Trading Company Limited.