Adhesives / Glue / Epoxy - Politek Vietnam Import Export Services Trading Company Limited

ARBOSIL 1090

quantri — Sat, 08 Mar 2025 05:19:10 +0000

Arbosil 1090 is a one-part Low Modulus Neutral Cure Silicone Sealant which cures on exposure to moisture vapour to form a very elastic silicone rubber. Arbosil 1090 has good adhesion to concrete, brickwork, metals, and many other common construction substrates.

Application and Key Benefits of Arbosil 1090

MAIN APPLICATIONS

Recommended for use in many construction applications including curtain walling, both original and remedial perimeter sealing, structural joints in light cladding, profiled metal roof sheets, joints in flat roof systems and guttering joints.

NB: Not recommended for overpainting, use with laminated glass, and use against natural stone.

APPLICATION INSTRUCTIONS

Joint Preparation

The joint surfaces must be clean, dry, and free from all contamination. The surfaces should be degreased using the appropriate ARBO® Cleaner. ARBO Primer 2650 is recommended on porous materials such as brickwork and concrete.

It is recommended that ARBO Technical Services be consulted regarding the use of cleaners and primers for specific purposes.

Joint Backing

Where applicable, use appropriately sized cross-linked, closed cell Polyethylene foam.

Application

All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000-16: 1997 + A1: 2010 the British Standard for the sealing of joints in buildings using sealants. Arbosil 1090 is supplied in polyethylene 380ml cartridges and can be applied into the joint using an ARBO Caulking Gun.

Good adhesion to many substrates
Cures to form a highly elastic silicone rubber.
Varied uses including as original or remedial perimeter seal

Technical Data
Colours	Grey, Black, Buff, Dark Bronze, Portland, Rustic Red
	Special colours can be made to order subject to minimum batch size quantities. Please contact ARBO Technical Services Department for further information.
Skin Time at 20°C/65 % RH:	10-20 minutes
Application Temperature:	+5°C to +50°C
Service Temperature:	-50°C to +120°C
Cure Rate at 20°C/65 % RH:	1mm/24 hours
Chemical Resistance:	Resistant to most dilute acids and alkalis. Organic solvents may cause the sealant to swell and lose adhesion.
UV Resistance:	Very Good
Service Life:	25 years+
Movement Accommodation:	Butt joints (movement in tension and compression): 70 %
Lap joints (movement in shear):	150%
Specification Compliance	ISO 11600 – F/G – 25 LM

The post ARBOSIL 1090 appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Weld-On® 717™ PVC

quantri — Sat, 08 Mar 2025 05:08:38 +0000

Heavy bodied, medium setting, low VOC PVC cement for all classes and schedules with interference fit through 12″ (315 mm) diameter. Quality formulation for plumbing, industrial, pool, irrigation and electrical piping systems. It has good gap filling properties and its medium set allows more working time in warm weather.

AVAILABLE COLORS	Clear, Gray
MAX RECOMMENDED PIPE SIZE (INTERFERENCE FIT)	12″ (315 mm)
RELATIVE SET TIME	Medium
APPLICABLE PERFORMANCE SPECIFICATION	CSTB QB16 (Clear Only) ASTM D 2564 NSF/ANSI 14 NSF/ANSI 61 CSA B137.3 CSA B181.2 EN14814 EN14680
INDUSTRY LISTINGS
CLASSES, SCHEDULES & TYPES	All Rigid PVC
SHELF LIFE	Clear: 4 Years \| Gray: 3 Years
AVAILABLE SIZES	Clear: Gallon (#10141) Quart (#10144) Pint (#10147) 1/2 Pint (#10150) 1/4 Pint (#10861) Gray: Gallon (#10142) Quart (#10145) Pint (#10148) 1/2 Pint (#10151)

The post Weld-On® 717™ PVC appeared first on Politek Vietnam Import Export Services Trading Company Limited.

LOCTITE® SI 5399

quantri — Sat, 08 Mar 2025 05:03:40 +0000

A 1-part, multi-purpose, thixotropic silicone adhesive for industrial applications where a high heat tolerance is required.

LOCTITE® SI 5399 is a red, acetoxy silicone-based bonding and sealing agent for high-temperature industrial applications up to 350°C (662°F). It’s typically used for industrial ovens and heating engineering applications, but it is also suitable for household heat appliances such as ovens, heat exchangers, and water heaters. Its thixotropic nature makes it easy to apply and reduces liquid migration after application. LOCTITE SI 5399 cures at room temperature.

Technical information

Color	Red
Operating Temperature	-55.0 – 300.0 °C (-65.0 – 570.0 °F )
Time of Bubble	5.0 minutes
Extrusion Ratio	250.0 g/min
Application	For High Temperature Applications

The post LOCTITE® SI 5399 appeared first on Politek Vietnam Import Export Services Trading Company Limited.

ARBOSIL1096 S – Silicone Sealant

quantri — Sat, 08 Mar 2025 04:56:20 +0000

ARBOSeal Pro^® Range

Arbosil 1096 S is a one-part, low modulus, neutral cure silicone sealant that cures on exposure to moisture vapour, forming an elastic silicone rubber. This sealant is ideal for a wide range of construction applications, providing excellent adhesion to many substrates and long-lasting performance.

Application and Key Benefits of Arbosil 1096 S

Arbosil 1096 S is recommended for use in many forms of construction including glass to glass joints, curtain wall assemblies, perimeter seals on curtain walling, perimeter sealing of polyester powder coated and PVCu frames and glazing of windows in swimming pool buildings.

Suitable for use as a weather seal with structural glazed assemblies.

Note: It is not recommended for overpainting and use against natural stone..

Versatile Application: Suitable for glass-to-glass joints, curtain wall assemblies, and perimeter sealing.
Weather Seal: Ideal for use as a weather seal with structural glazed assemblies.
Excellent Adhesion: Bonds well to polyester powder coated and PVCu frames.
Durability: Provides a long service life of over 25 years.

Technical Data
Colours	White, Black, Grey, Translucent, Anthracite, Mahogany, RAL 7016
Material	Silicone
Skin Time at 20°C/65 % RH:	8-12 minutes
Application Temperature:	+5°C to +50°C
Service Temperature:	-50°C to +150°C
Typical Shore Hardness:	25-30
Cure Rate at 20°C/65 % RH:	2mm/24 hours
Chemical Resistance:	Resistant to most dilute acids and alkalis. Organic solvents may cause the sealant to swell and lose adhesion.
UV Resistance:	Very Good
Service Life:	25 years+
Movement Accommodation:	Butt joints (movement in tension and compression): 50 %
Lap joints (movement in shear):	100 %

The post ARBOSIL1096 S – Silicone Sealant appeared first on Politek Vietnam Import Export Services Trading Company Limited.

ARBO Arbosil HDLMS – Silicone Sealant

quantri — Sat, 08 Mar 2025 04:44:58 +0000

Arbosil HDLMS is a new one part Neutral Cure Silicone Sealant which cures on exposure to moisture vapour to form a durable elastic silicone rubber. Arbosil HDLMS is designed to produce a higher viscosity to enhance the body of the product for improved tooling properties, with quick skinning and full cure time.

Arbosil HDLMS

One Part Low Modulus Silicone Sealant

Joints in translucent roofing sheets
MVP Glazing & Heel Bead Methods of Glazing Double Glazed Units
Remedial Glazing
Perimeter Sealing Of UPVC Frames
Higher Density
Can be used for industrial applications including
lead, stainless steel, coated metals
and HVAC ducting.
General maintenance and
sealing suitability.

Not recommended

Overpainting
Glass Wall Assemblies
Use against Natural Stone

The post ARBO Arbosil HDLMS – Silicone Sealant appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Apollo Silicone Sealant A600

quantri — Sat, 08 Mar 2025 04:26:15 +0000

HIGHLIGHTED FEATURES

Characteristics	Low distortion rate. Noncorrodible. Fast-drying
Color	Translucent, white, gray, black
Standards	ASTM C 920-01 Type S, Grade NS, Class 12 1/2 GB/T 14683-93 8020 F, N JIS A 5758-97 G-F 20LM
Capacity	300 mL/cartridge
Packaging	25 cartridges/box
Note	Especially suitable for the environment outside the house

Apollo Silicone Sealant A600

The Apollo Silicone Sealant A600 has been one of the leading silicone adhesives widely trusted in Vietnam for many years. The products under the Apollo brand have gained recognition for their ability to meet the demand for sealing, bonding, and waterproofing various surfaces, boasting high durability, aesthetic appeal, and user safety.

Introduction to Apollo Silicone Sealant A600

The premium-grade sealant, Apollo Silicone A600, is a one-part product with a neutral curing formulation. With superior tensile strength and elasticity, the Apollo A600 adhesive can restore its original shape even when subjected to stretching or compression. Moreover, it can be applied to various types of surfaces.

Product applications

Apollo Silicone Sealant A600, upon exposure to atmospheric moisture, immediately cures and forms a rubber-like elastic seal. This sealant possesses resilience and can withstand harsh weather conditions, moisture, ozone, and UV radiation.

Additionally,¹ Apollo Silicone A600 is designed to be used on various materials such as mortar, white cement, and does not corrode metals due to its neutral properties. With its flexible elasticity, it absorbs external environmental vibrations well, making it suitable for complex construction conditions and locations. Furthermore, Apollo Silicone A600 adhesive can withstand harsh environmental conditions like high temperatures, humidity, ozone, and UV radiation.

Product Benefits of Apollo Silicone Sealant A600:

Weather Resistance: It can withstand various weather conditions like sun, rain, snow, ozone, and high temperatures.
Non-Corrosive: Being a neutral-cure sealant, it doesn’t cause corrosion on metal surfaces.
Recovery After Compression: It regains its original shape after being stretched or compressed.
Convenient Application: It’s ready to use as soon as it’s provided.
Convenient Usage: It’s simple and easy to handle during application.

The post Apollo Silicone Sealant A600 appeared first on Politek Vietnam Import Export Services Trading Company Limited.

DOW CORNING 7 Electrical / White Insulation Compound

quantri — Sat, 08 Mar 2025 03:45:35 +0000

Dow Corning 7 is a dimethyl silicone compound, similar to grease, used as a lubricant, preservative and release agent for molds, adhesives, rubber, metals, processing equipment and plastic extruders. It provides flexibility, thermal stability, food contact safety and resistance to moisture and oxidation.
NLGI Grade 1, translucent white, is used primarily as a release agent or cable pulling lubricant.

APPLICATION

Mold release agent for casting shells and core molds, treatment of bursting marks on tire and rubber presses.
Adhesive and glue release agent, cable puller Lubricant for pulling rubber-coated cables through conduit.
Release agent for plastic extruder and processing equipment and release agent for plastic film packaging machine.

PERFORMANCE BENEFITS

Maintains usable consistency from -40°C to 204°C
Reality is not volatile
Moisture resistant
Insulation
Excellent rubber lubrication
Excellent release and sealing properties
Anti-oxidation
Shows little tendency to dry out in service
Approved for use in contact with food under FDA Regulation 21 CFR 175.300
Listed to NSF Standard 51 for use in food processing equipment
Listed to NSF Standard 61 for use in potable water applications

PRODUCT DETAILS

Product Type	Compounds
Technology	Silicone
NLGI grade	1
Thickener	Silica
Low temperature (C)	-40^oC
High temperature (C)	+204^oC
Color	Matte white

The post DOW CORNING 7 Electrical / White Insulation Compound appeared first on Politek Vietnam Import Export Services Trading Company Limited.

DAP® Acrylic and Silicone Sealants

quantri — Sat, 08 Mar 2025 03:31:59 +0000

Seals out drafts and moisture around windows, siding and doors.

Flexible seal resists cracking and shrinking.
100% waterproof. Mold and mildew resistant.
Acrylic Latex – Paintable. Fill gaps in interior walls, ceilings and trim.
Silicone – For wet environments. Use in kitchens and bathrooms.
Use with Caulk Guns, sold separately.
COLOR: White, Clear
SIZE: 10 oz.

The post DAP® Acrylic and Silicone Sealants appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Loctite® Threadlockers

quantri — Sat, 08 Mar 2025 03:26:10 +0000

One little drop prevents leakage. Seals metal threads.

Low Strength – Use for small screws on laptops, eyeglasses, carburetors and small electronics. Removable with hand tools.
Medium Strength – Use for oil pan bolts, disc brake calipers and pulley assemblies. Removable with hand tools.
High Strength – Use for permanent assembly of bearing caps, motor mounts and suspension bolts.

DESCRIPTION	STRENGTH	COLOR	SIZE
222MS^™	Low	Purple	1.69 oz.
242^™	Medium	Blue	1.69 oz.
242^™			8.45 oz.
243^™			1.69 oz.
248^™			.67 oz.
290^™	Medium	Green	1.69 oz.
262^™	High	Red	1.69 oz.
263^™
271^™

The post Loctite® Threadlockers appeared first on Politek Vietnam Import Export Services Trading Company Limited.

Loctite® Instant Adhesives

quantri — Sat, 08 Mar 2025 03:20:43 +0000

Strong, fast bonds for metals, plastic and rubber.

454™ QuickTite^®: Bonds instantly. Instant adhesive gel bonds small parts with precision control.
380™ Black Max^®: Use on parts subject to shock, vibration and temperature cycling.
401™ Prism^®: Bonds difficult surfaces like fabric, leather, wood and paper.
404™ Quick Set^®: Quickly bonds rubber gaskets and pads to plastic components.
406™ Prism^®: Use for difficult-to-bond plastics, including PVC and polycarbonate.
444™ Tak Pak^®: Use for wire tacking and securing hardware to printed circuit boards.
495™ Super Bonder^®: Multipurpose instant adhesive for bonding a wide range of materials.
496™ Super Bonder^®: Excellent shear and tensile strength on composites and metals.

DESCRIPTION	WORKING TIME	COLOR	SIZE
454^™	15 secs.	Clear	.14 oz.
380^™	90 secs.	Black	1 oz.
401^™	15 secs.	Clear	.7 oz.
404^™	30 secs.		.33 oz.
406^™	15 secs.		.7 oz.
444^™	30 secs.		.7 oz.
495^™	20 secs.		1 oz.
496^™	30 secs.		1 oz.

The post Loctite® Instant Adhesives appeared first on Politek Vietnam Import Export Services Trading Company Limited.