Allows for Smoothest Movement along the Z-axis
Magnalube-G PTFE Grease is a high-temp grease that will outlast conventional grease lubricants. Magnalube-G is a non-soap elastomer/PTFE lubricating grease formulated with the highest quality raw materials. Magnalube-G has a unique formula that molecularly binds PTFE with polyurea for superior performance in a wide range of applications. The grease will prevent breakdowns, and extend operating intervals in most cases. It is fortified with a number of proprietary additives that inhibit rust and oxidation as well as giving added resistance to extreme pressure. Magnalube-G has a dropping point of well over 500°F. It performs well in harsh environments, especially when users want to avoid migration and water washout. This is a superb all-purpose grease, and is often found to solve problems that other greases cannot.
Do NOT use on the smooth axis rods.
Tech Specs
- NLGI Grade: 2
- Thicker Type: Polyurea
- Additives: Rust Inhibitors, Oxidation Inhibitors, Extreme Pressure, PTFE
- Texture: Smooth
- Colour: Blue Green
- Food Contact Rating: H2 = No Contact
- Worked Penetration, 60 Strokes: 287
- Roll Stability, % Change: Less than 2
- Dropping Point, Min. : 260°C
- Oxidation Stability, 100 hrs, @ 98°C: 10 Max
- Rust Preventative Properties: Excellent
- Water Washout, % loss, @ 79°C, (typical): Less than 5
- Salt Spray (Galvanic Corrosion): Excellent
- Boiling Water Immersion: Excellent, *No disintegration after 10 minutes
- High Temperature Performance: 500 hours— 10,000 RPM @ 232°C, *Pass
This Machine Grease is used for lubricating the trapezoidal lead screw on your printer, and ensuring smooth movements along the Z-axis. The grease is applied as a thick green paste, and is contained within a leak and burst-free container. The tube used to contain the grease has been constructed with aluminum and filled to an optimal weight of 0.75 ounces (21.25 grams). The container is made from a durable material, designed to eliminate leakage or bursting. The tube is ideal for precise applications of Magnalube grease, since the needle tip dispenser makes it quick & easy to apply the exact amount of grease required in those tight, hard to reach spots. This makes it a great addition to your 3D Printing workflow.
