PS1520/PS1530 Features
The Wilden® bolted metal pump, also known as FIT, sets the new standard for pump performance. Featuring an enhanced flow path design, Wilden’s bolted-construction pumps offer improved flow rates (up to 35% over competitive models) as well as improved diaphragm life. Wilden’s bolted pumps are also designed for superior containment and have the exact bolt down footprint and inlet/discharge connections as Wilden clamped pumps for easy replacement.
- NPT or BSPT threaded inlet/discharge liquid connections (PS1520)
- DIN or ANSI flanged inlet/discharge liquid connections (PS1530) that don’t require welding or nipple attachment
- Featuring the energy-efficient Pro-Flo® SHIFT ADS
- Greater flow – more gallons pumped per SCFM
- Reduced air consumption and kilowatt usage
- Largest chemical compatibilities
- Portable and submersible
- Large-solids passage
- High suction lift
- Ease of operation and maintenance
- Flexible internal adjustment on manifolds
- Increased on/off reliability
- Longest Mean Time Between Repair (MTBR)
Dimensions |
Flow Curve – EZ-Install TPE-Fitted |
 |
 |
| Note: Dimensions vary by material and connection. For additional information, please refer to the P1520/PS1530 Metal Manual. | Note: Additional performance curves can be found in the PS1520/PS1530 Metal Manual. |
Specifications
| Air Inlet 3/4″ FNPT |
Liquid Inlet 76 mm (3″) |
Liquid Discharge76 mm (3) | Connection Type NPT/BSPT (Threaded) DIN/ANSI (Flanged) |
Max Pressure 8.60 bar (125.00 psi) |
Max Diameter Solids 8.60 mm (125″) |
| Max Suction Lift Capability Rubber: 7.20m (23.80′) Dry, 9.70m (31.80′) Wet EZ-Install TPE: 6.40m (21.10′) Dry, 9.70m (31.80′) Wet Full-Stroke PTFE: 6.20m (20.20′) Dry, 8.60m (28.40′) Wet Full-Stroke PTFE (Ductile Iron): 5.90m (19.50′) Dry, 9.70m (31.70′) Wet |
Max Flow Rate Rubber: 1026.00 lpm (271.00 gpm) EZ-Install TPE: 1026.00 lpm (271.00 gpm) Full-Stroke PTFE: 992.00 lpm (262.00 gpm) Full-Stroke PTFE (Ductile Iron): 874.00 lpm (231.00 gpm) |
||||
| Displacement Per Stroke Rubber: 5.1 L (1.35 gal) EZ-Install TPE: 5.4 L (1.43 gal) Full-Stroke PTFE: 5 L (1.32 gal) Full-Stroke PTFE (Ductile Iron): 4.8 L (1.26 gal) |
|||||
Wetted Housings |
Non-Wetted Housings |
||||||||||||||||||||||
|
|
||||||||||||||||||||||
Elastomer Options
| Material | Temperature Limits |
|---|---|
| Buna-N | -12.00°C to 82.00°C (10.00°F to 180.00°F) |
| EPDM | -51.00°C to 138.00°C (-60.00°F to 280.00°F) |
| FKM | -40.00°C to 177.00°C (-41.00°F to 350.00°F) |
| Geolast® | -40.00°C to 82.00°C (-40.00°F to 180.00°F) |
| Neoprene | -18.00°C to 93.00°C (0.00°F to 200.00°F) |
| PTFE* | 4.00°C to 104.00°C (40.00°F to 220.00°F) |
| Polyurethane | -12.00°C to 66.00°C (10.00°F to 150.00°F) |
| Saniflex™ | -29.00°C to 104.00°C (-20.00°F to 220.00°F) |
| Wil-Flex™ | -40.00°C to 107.00°C (-40.00°F to 225.00°F) |
* 4°C to 149°C (40°F to 300°F) – 13 mm (1/2″) and 25 mm (1″) models only
