Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and a non-contacting auxiliary lip optimize the sealing against the shaft also in polluted environment.
- High pumping rate
- Higher contamination exclusion with dust lip
- With garter spring
- Accommodate misalignment
Dimensions
Shaft diameter | 17 mm |
Housing bore diameter | 40 mm |
Seal width | 7 mm |
TECHNICAL SPECIFICATION
Type of outside diameter |
Rubber metal reinforced
|
Lip material |
Nitrile rubber (NBR)
|
Seal design |
HMSA10
|
Compliance with standard |
ISO 6194, DIN 3760
|
Performance
Limiting speed | 3 900 r/min |
Maximum operating temperature | 100 °C |
Minimum operating temperature | -40 °C |
Permissible circumferential speed | 3.46 m/s |
Rotational speed | 3 900 r/min |
Properties
Design | HMSA10 |
Auxiliary lip | Yes |
Sealing lip material | Nitrile rubber (NBR) |
Type of outside diameter | Rubber metal reinforced |
Unit system | Metric |